Causality estimates among brain cortical areas by Partial Directed Coherence: simulations and application to real data

The problem of the definition and evaluation of brain connectivity has become a central one in neuroscience during the latest years, as a way to understand the organization and interaction of cortical areas during the execution of cognitive or motor tasks. Among various methods established during the years, the Partial Directed Coherence (PDC) is a frequency-domain approach to this problem, based on a multivariate autoregressive modeling of time series and on the concept of Granger causality. In this paper we propose the use of the PDC method on cortical signals estimated from high resolution EEG recordings, a non invasive method which exhibits a higher spatial resolution than conventional cerebral electromagnetic measures. The principle contributions of this work are the results of a simulation study, testing the performances of PDC, and a statistical analysis (via the ANOVA, analysis of variance) of the influence of different levels of Signal to Noise Ratio and temporal length, as they have been systematically imposed on simulated signals. An application to high resolution EEG recordings during a foot movement is also presented

Uptake and effects of a mixture of widely used therapeutic drugs in Eruca sativa L. and Zea mays L. plants

Pharmaceutically active compounds (PACs) are continuously dispersed into the environment due to human and veterinary use, giving rise to their potential accumulation in edible plants. In this study, Eruca sativa L. and Zea mays L. were selected to determine the potential uptake and accumulation of eight different PACs (Salbutamol, Atenolol, Lincomycin, Cyclophosphamide, Carbamazepine, Bezafibrate, Ofloxacin and Ranitidine) designed for human use. To mimic environmental conditions, the plants were grown in pots and irrigated with water spiked with a mixture of PACs at concentrations found in Italian wastewaters and rivers. Moreover, 10 7 and 100 7 concentrations of these pharmaceuticals were also tested. The presence of the pharmaceuticals was tested in the edible parts of the plants, namely leaves for E. sativa and grains for Z. mays. Quantification was performed by liquid chromatography mass spectroscopy (LC/MS/MS). In the grains of 100 7 treated Z. mays, only atenolol, lincomycin and carbamazepine were above the limit of detection (LOD). At the same concentration in E. sativa plants the uptake of all PACs was >LOD. Lincomycin and oflaxacin were above the limit of quantitation in all conditions tested in E. sativa. The results suggest that uptake of some pharmaceuticals from the soil may indeed be a potential transport route to plants and that these environmental pollutants can reach different edible parts of the selected crops. Measurements of the concentrations of these pharmaceuticals in plant materials were used to model potential adult human exposure to these compounds. The results indicate that under the current experimental conditions, crops exposed to the selected pharmaceutical mixture would not have any negative effects on human health. Moreover, no significant differences in the growth of E. sativa or Z. mays plants irrigated with PAC-spiked vs. non-spiked water were observed

Markerless 3D human pose tracking through multiple cameras and AI: Enabling high accuracy, robustness, and real-time performance

Tracking 3D human motion in real-time is crucial for numerous applications across many fields. Traditional approaches involve attaching artificial fiducial objects or sensors to the body, limiting their usability and comfort-of-use and consequently narrowing their application fields. Recent advances in Artificial Intelligence (AI) have allowed for markerless solutions. However, most of these methods operate in 2D, while those providing 3D solutions compromise accuracy and real-time performance. To address this challenge and unlock the potential of visual pose estimation methods in real-world scenarios, we propose a markerless framework that combines multi-camera views and 2D AI-based pose estimation methods to track 3D human motion. Our approach integrates a Weighted Least Square (WLS) algorithm that computes 3D human motion from multiple 2D pose estimations provided by an AI-driven method. The method is integrated within the Open-VICO framework allowing simulation and real-world execution. Several experiments have been conducted, which have shown high accuracy and real-time performance, demonstrating the high level of readiness for real-world applications and the potential to revolutionize human motion capture.Comment: 19 pages, 7 figure

Potential fuel saving in a powertrain derived from the recovery of the main energy losses for a long haul European mission

[EN] The reduction of automotive fuel consumption and emissions remains one of the main challenges. This paper presents the potential fuel saving in a CNG-powertrain derived from the recovery of the main energy losses. The analysis includes the kinetic energy recovery by a belt starter generator (BSG), the exhaust gas waste heat recuperation by using in a cascade approach, a thermoelectric generator (TEG) and a turbo-generator (TBG)- and the electrification of the main auxiliaries. An additional 48 V board net as well as the addition of a storage system are also included in the study. To support on the design phase of the project and in the operation strategy, a dynamic model in Matlab/Simulink (R) has been used. The model includes all the new components/major changes required in the vehicle- experimentally validated-. It has been used on backward simulations for the ACEA long haul mission in order to maximize the vehicle's efficiency. Estimations at rating point (600 Nm and 1200 rpm) result in an electric production up to 4 kW h and a fuel saving of 7.5%. The most convenient technologies in the ACEA cycle turns out to be the KERs followed by the TBG.This work has been developed in the frame of the project of the European Seventh Union Framework Program by the project High efficiency energy conversion for future heavy duty transport High efficiency energy conversion for future heavy duty transport GASTone grant agreement 605456. The authors are grateful for the given support.Hervas-Blasco, E.; Navarro-Peris, E.; De Rosa, M.; Corberán, JM. (2017). Potential fuel saving in a powertrain derived from the recovery of the main energy losses for a long haul European mission. Energy Conversion and Management. 150:485-499. https://doi.org/10.1016/j.enconman.2017.08.01848549915

Use of the Intermittent Abdominal Pressure Ventilation to guarantee speech in a tracheostomized Amyotrophic Lateral Sclerosis patient

n/

Detection of buried objects using reflected GNSS signals

The use of reflected Global Navigation Satellite System (GNSS) signals for sensing the Earth has been growing rapidly in recent years. This technique is founded on the basic principle of detecting GNSS signals after they have been reflected off the Earth's surface and using them to determine the properties of the reflecting surface remotely. This is the so-called GNSS reflectometry (GNSS-R) technique. In this paper, a new application regarding the detection of metallic buried objects is analyzed and it is validated through several experimental campaigns. Although the penetration depth of GNSS signals into the ground is not optimal and depends on the soil moisture, GNSS signals can likely interact approximately with the first 10 cm of the ground and therefore can be reflected back by any metallic object buried on the first terrain layer. A very light and low-cost GNSS receiver prototype based on a software-defined radio approach was developed. This receiver can be used as a payload on board small drones or unmanned aerial systems to detect metallic objects (mines or other explosive devices). A signal processing tool based on an open-loop GNSS signal acquisition strategy was developed. The results of two experiments which show the possibility of using GNSS-R signals to detect buried metallic objects and to provide an estimate of their dimensions are discussed

Origins Space Telescope: predictions for far-IR spectroscopic surveys

We illustrate the extraordinary potential of the (far-IR) Origins Survey Spectrometer (OSS) on board the Origins Space Telescope (OST) to address a variety of open issues on the co-evolution of galaxies and AGNs. We present predictions for blind surveys, each of 1000 h, with different mapped areas (a shallow survey covering an area of 10 deg$^{2}$ and a deep survey of 1 deg$^{2}$) and two different concepts of the OST/OSS: with a 5.9 m telescope (Concept 2, our reference configuration) and with a 9.1 m telescope (Concept 1, previous configuration). In 1000 h, surveys with the reference concept will detect from $\sim 1.9 \times 10^{6}$ to $\sim 8.7 \times 10^{6}$ lines from $\sim 4.8 \times 10^{5}$-$2.7 \times 10^{6}$ star-forming galaxies and from $\sim 1.4 \times 10^{4}$ to $\sim 3.8 \times 10^{4}$ lines from $\sim 1.3 \times 10^{4}$-$3.5 \times 10^{4}$ AGNs. The shallow survey will detect substantially more sources than the deep one; the advantage of the latter in pushing detections to lower luminosities/higher redshifts turns out to be quite limited. The OST/OSS will reach, in the same observing time, line fluxes more than one order of magnitude fainter than the SPICA/SMI and will cover a much broader redshift range. In particular it will detect tens of thousands of galaxies at $z \geq 5$, beyond the reach of that instrument. The polycyclic aromatic hydrocarbons lines are potentially bright enough to allow the detection of hundreds of thousands of star-forming galaxies up to $z \sim 8.5$, i.e. all the way through the re-ionization epoch. The proposed surveys will allow us to explore the galaxy-AGN co-evolution up to $z\sim 5.5-6$ with very good statistics. OST Concept 1 does not offer significant advantages for the scientific goals presented here.Comment: 24 pages, 20 figures, 2 tables, accepted for publication in PAS

Calidad del aceite de oliva virgen con relación a la zona de origen.

To elucidate the weight and the influence of the origin area on the analytical and compositional variables of olive oil, an investigation was carried out. Five Italian geographical zones were chosen. They were in the neighbour of the: (i) Faculty of Agriculture of University of Perugia (UNI-PG); (ii) the Olive Growing Institute-National Research Council of Perugia (NRC-PG); (iii) the Experimental Olive Growing Institute of Spoleto (EOI-SPOL); (iv) the Agricultural Technical Institute of Pescia (ATI-PES); and (v) the Faculty of Agriculture of University of Florence (UNI-FL). From these areas, Frantoio, Leccino and Moraiolo olive variety samples were taken, which were processed by a mini oil-mill. The research results showed that the quality, typicality and shelf-life parameters and the flavour of the oils were largely influenced by the origin zone, i.e., by the climatic and pedologic factors of the production environment. The influence exerted on some oil constituent groups, as phenols, tocopherols, aromatic volatile compounds, and fatty acids, should be emphasized as these components are closely related to the quality and typicality of product. Some oil genuineness parameters were affected as well by the environmental variables.Se ha realizado una investigación para evidenciar la importancia y la Influencia que la zona de origen tiene sobre las variables analíticas del aceite de oliva virgen. Han sido seleccionadas cinco zonas geográficas de Italia: (i) una cerca de la Facultad de Agraria de la Universidad de Perusa (UNI-PG); (ii) una cerca del Instituto para la Olivicultura - Consejo Nacional de las Investigaciones de Perusa (CNI-PG); (iii) una zona próxima al Instituto Experimental para la Olivicultura de Espoleto (lEO-ESP); (iv) una zona cerca Instituto Técnico Agrario de Pescia (ITA-PES); (v) una zona cerca de la Facultad de Agraria de la Universidad de Florencia (UNI-FL). De estas zonas han sido tomadas muestras de aceitunas de las variedades Frantoio, Leccino y Moraiolo, las cuales han sido procesadas con un micro-molino de aceite. Los resultados de la investigación, han puesto en evidencia que los parámetros de la calidad, tipismo y vida útil, y el flavor de los aceites estaban bastante influenciados por la zona de origen, es decir por los factores climáticos y pedológicos del medio agrícola. Se debe subrayar la influencia observada en algunos grupos de componentes, como fenoles, tocoferoles, compuestos volátiles aromáticos y ácidos grasos, puesto que estas substancias están estrechamente relacionadas con la calidad y el tipismo del producto. Algunos parámetros de la pureza están también influenciados por las variables ambientales